AT91SAM9260B-CU
Microprocessors
Technical Specifications
| Type | Description |
|---|---|
| Core Processor | ARM Cortex-ASeries |
| Maximum Clock Speed | 180 MHz |
| Adc Bits | 10.0 |
| Type | Description |
|---|---|
| Features | Power-on reset (POR);External pin reset (NRST);Software reset;Watchdog reset;Window watchdog (WWDG);Programmable watchdog;Built-in general-purpose timer |
| Package / Case | BGA-217 |
Product Introduction
The SAM9260 is based on the integration of an ARM926EJ-S processor with fast ROM and RAM memories and a wide range of peripherals.
The SAM9260 embeds an Ethernet MAC, one USB Device Port, and a USB Host controller. It also integrates several standard peripherals, such as the USART, SPI, TWI, Timer Counters, Synchronous Serial Controller, ADC and MultiMedia Card Interface.
The SAM9260 is architectured on a 6 - layer matrix, allowing a maximum internal bandwidth of six 32 - bit buses. It also features an External Bus Interface capable of interfacing with a wide range of memory devices.
Features
- 180 MHz ARM926EJ - S ARM Thumb Processor – 8 KBytes Data Cache, 8 KBytes Instruction Cache, MMU
- 32 - bit External Bus Interface supporting 4 - bank SDRAM/LPSDR, Static Memories, CompactFlash, SLC NAND Flash with ECC
- Two 4 - kbyte internal SRAM, single - cycle access at system speed
- One 32 - kbyte internal ROM, embedding bootstrap routine
- ITU - R BT. 601/656 Image Sensor Interface
- USB Device and USB Host with dedicated On - Chip Transceiver
- 10/100 Mbps Ethernet MAC Controller
- One High Speed Memory Card Host
- Two Master/Slave Serial Peripheral Interfaces
- Two Three - channel 32 - bit Timer/Counters
- One Synchronous Serial Controller
- One Two - wire Interface
- Four USARTs
- Two UARTs
- 4 - channel 10 - bit ADC
- 90 MHz six 32 - bit layer AHB Bus Matrix – 22 Peripheral DMA Channels – Boot from NAND Flash, DataFlash or serial DataFlash – Reset Controller with On - Chip Power - on Reset – Selectable 32,768 Hz Low - Power and 3 - 20 MHz Main Oscillator – Internal Low - Power 32 kHz RC Oscillator – One PLL for the system and one PLL optimized for USB – Two Programmable External Clock Signals – Advanced Interrupt Controller and Debug Unit – Periodic Interval Timer, Watchdog Timer and Real Time Timer
- Three 32 - bit Parallel Input/Output Controllers
- 96 Programmable I/O Lines Multiplexed with up to Two Peripheral I/Os
- 217 - ball BGA, 0.8mm pitch
- 208 - pin QFP, 0.5mm pitch
Datasheet
Alternative Parts
Common AT91SAM9260B-CU alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | 3A991A2 |
| Type | Details |
|---|---|
| CNHTS | 8542319090 |
Sourcing Information
Sourcing AT91SAM9260B-CU from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for AT91SAM9260B-CU, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Need AT91SAM9260B-CU? Send us your required quantity and specifications for a sourcing check and quotation.