AT32F415CBT7
Microcontrollers
Manufacturer
ARTERYAsian Brands
MPN
AT32F415CBT7
Product Type
Core Processor
ARM Cortex-M4
Maximum Clock Speed
150 MHz
Package / Case
LQFP-48
Datasheet
Key Attributes
ARM 32-bit Cortex - M4 microcontroller with flash memory, sLib, timers, ADCs, comparators, and communication interfaces
Technical Specifications
| Type | Description |
|---|---|
| Core Processor | ARM Cortex-M4 |
| Core Bits | 32 |
| Maximum Clock Speed | 150 MHz |
| Flash Memory | 128 KB |
| Number of I/O | 55 |
| Flash Type | FLASH |
| Adc Bits | - |
| Type | Description |
|---|---|
| Oscillator Type | Built-in+External |
| Eeprom Bytes | - |
| DAC (Bit) | - |
| Operating Temp | -40°C ~ +105°C |
| Working Voltage V | 3.1 V |
| Package / Case | LQFP-48 |
Product Introduction
32-bit ARM Cortex-M4 microcontroller with 64 KB to 256 KB Flash, sLib, 11 timers, 1 ADC, 2 comparators, 12 communication interfaces (1 CAN and 1 OTGFS)
Features
- 32-bit ARM Cortex-M4 CPU core
- Up to 150 MHz operating frequency with MPU
- Single-cycle multiplication and hardware division
- DSP instruction set
- 64 KB to 256 KB flash memory
- 18 KB boot code area for Bootloader
- sLib: designates a specified main flash region as a secure execute-only code library — code in this region can be called but not read
- 32 KB SRAM
- 2.6V ~ 3.6V supply voltage
- POR, LVR, and PVM
- Low-power modes: Sleep, Deep Sleep, and Standby
- VBAT powers LEXT, ERTC, and 20 × 32-bit battery-powered registers (BPR)
- 4 ~ 25 MHz crystal oscillator (HEXT)
- Factory-trimmed 48 MHz HICK: ±1% accuracy at 25°C, ±2% accuracy over -40°C ~ +105°C
- PLL with flexible configuration: 31× to 500× multiplication and 1 to 15 division factors
- 32 kHz crystal oscillator (LEXT)
- Low-speed internal clock (LICK)
- 1 × 12-bit 2 MSPS ADC with up to 16 external input channels
- Temperature sensor (VTS) and internal reference voltage (VINTRV)
- 2 × comparators (CMP)
- 2 × 7-channel DMA controllers, 14 channels total
- Up to 55 fast GPIO ports
- All GPIOs mappable to 16 external interrupts (EXINT)
- Almost all GPIOs 5V-tolerant
- 1 × 16-bit 7-channel advanced timer: 3 complementary PWM output pairs with dead-time control and emergency stop
- Up to 5 × 16-bit timers and 2 × 32-bit timers, each with up to 4 channels for input capture/output compare/PWM/pulse counting and incremental encoder input
- 2 × watchdog timers (general WDT and windowed WWDT)
- SysTick timer: 24-bit down counter
- ERTC: enhanced RTC with auto-wakeup, alarm, sub-second precision, hardware calendar, and calibration
- 2 × I2C interfaces, SMBus/PMBus support
- 5 × USART interfaces: master synchronous SPI and modem control; ISO7816, LIN, and IrDA
- 2 × SPI interfaces (36 Mbit/s), both multiplexable as half-duplex I2S
- CAN interface (2.0B Active) with 256-byte dedicated buffer
- OTGFS full-speed controller with on-chip PHY and 1280-byte dedicated buffer
- SDIO interface
- CRC calculation unit
- 96-bit unique chip ID (UID)
- SWD and JTAG interfaces
- Temperature range: -40°C ~ +105°C
Datasheet
Compliance & Export Codes
| Type | Details |
|---|---|
| CNHTS | 8542319090 |
Sourcing Information
Sourcing AT32F415CBT7 from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
When you need AT32F415CBT7, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Need AT32F415CBT7? Send us your required quantity and specifications for a sourcing check and quotation.