AT32F413RCT7
Microcontrollers (MCU/MPU)
Manufacturer
ARTERYAsian Brands
MPN
AT32F413RCT7
Product Type
Core Processor
ARM Cortex-M4F
Maximum Clock Speed
200 MHz
Package / Case
LQFP-64(10x10)
Datasheet
Key Attributes
Based on ARM 32-bit Cortex-M4F microcontroller + FPU, with internal flash memory, sLib, USB, CAN, timers, ADC, and communication interfaces
Technical Specifications
| Type | Description |
|---|---|
| Core Processor | ARM Cortex-M4F |
| Core Size | 32 bit |
| Maximum Clock Speed | 200 MHz |
| Program Storage Size | 256 KB |
| Number of I/O | 55 |
| Flash Type | FLASH |
| ADC (Bit) | 12 bit |
| Type | Description |
|---|---|
| Oscillator Type | Built-in+External |
| EEPROM | - |
| DAC (Bit) | - |
| Operating Temperature | -40°C~+105°C |
| Supply Voltage | 2.6V~3.6V |
| Package / Case | LQFP-64(10x10) |
Product Introduction
ARM 32-bit Cortex -M4F microcontroller + FPU, with 64 Kbytes to 256 Kbytes internal flash, sLib, USB, 2 CAN, 12 timers, 2 ADC, 13 communication interfaces
Features
- Up to 200 MHz operating frequency with MPU, single-cycle multiplication and hardware division
- Embedded FPU
- DSP instruction set
- 64 KB to 256 KB internal Flash program/data memory
- SPIM interface: additional up to 16 MB external SPI Flash program/data memory interface
- Up to 64 KB SRAM
- sLib: designates a specified main memory region as a secure execution-only code library — code in this region can be called but not read
- 2.6 to 3.6 V power supply and I/O pins
- POR/PDR, PVD
- 4 to 25 MHz crystal oscillator
- Embedded factory-trimmed 48 MHz RC oscillator (1% accuracy at 25℃, 2.5% accuracy at -40℃ to +105℃) with ACC
- Embedded calibrated 40 kHz RC oscillator
- 32 kHz crystal oscillator with calibration
- Sleep, Stop, and Standby modes; VBAT supplies RTC and 42 × 16-bit backup registers
- 2 × 12-bit ADC, 0.5 μs conversion time (up to 16 input channels)
- Conversion range: 0 to 3.6 V
- Dual sample-and-hold
- Temperature sensor
- 12-channel DMA controller
- Supported peripherals: timers, ADC, SDIO, I2S, SPI, I2C, and USART
- SWD and JTAG interface
- 27/39/55 multifunctional bidirectional I/O pins; all I/O pins mappable to 16 external interrupts; almost all I/O pins 5 V tolerant
- All I/O pins are fast I/O with register access up to fAHB/2
- Up to 5 × 16-bit timers + 2 × 32-bit timers, each with up to 4 channels for input capture/output compare/PWM or pulse counting, and quadrature encoder input
- Up to 2 × 16-bit advanced PWM timers with dead-time control and emergency brake for motor control
- 2 watchdog timers (independent and windowed)
- SysTick timer: 24-bit down counter
- 2 I2C interfaces (SMBus/PMBus support)
- Up to 5 USART interfaces (ISO7816, LIN, IrDA, and modem control support)
- 2 SPI interfaces (50 Mbit/s), both remappable as I2S
- 2 CAN interfaces (2.0B Active)
- Crystal-less USB 2.0 full-speed interface
- SDIO interface
- CRC calculation unit, 96-bit unique chip ID
Datasheet
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS |
| Type | Details |
|---|---|
| CNHTS | 8542319090 |
Sourcing Information
Looking for a reliable source for AT32F413RCT7 from ARTERY? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.
For AT32F413RCT7, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Need AT32F413RCT7? Send us your required quantity and specifications for a sourcing check and quotation.