AT32F403ACGT7
Microcontrollers
Manufacturer
ARTERYAsian Brands
MPN
AT32F403ACGT7
Product Type
Core Processor
ARM Cortex-M4F
Maximum Clock Speed
240 MHz
Package / Case
LQFP-48
Datasheet
Technical Specifications
| Type | Description |
|---|---|
| Core Processor | ARM Cortex-M4F |
| Core Bits | 32 |
| Maximum Clock Speed | 240 MHz |
| Flash Memory | 1.049 MB |
| Number of I/O | 37 |
| Flash Type | FLASH |
| Type | Description |
|---|---|
| Adc Bits | 12.0 |
| Oscillator Type | Built-in+External |
| DAC (Bit) | 12bit |
| Operating Temp | -40°C ~ +105°C |
| Working Voltage V | 3.1 V |
| Package / Case | LQFP-48 |
Product Introduction
ARM 32-bit Cortex-M4F MCU + FPU, with 256 KB to 1024 KB internal Flash, sLib, USB, 17 timers, 3 ADCs, 20 communication interfaces
Features
- ARM 32-bit Cortex-M4F CPU with FPU
- Up to 240 MHz operating frequency with MPU, single-cycle multiplication and hardware division
- Built-in FPU with DSP instruction set
- 256 KB to 1024 KB internal Flash program/data memory
- sLib: designates a specified main memory region as a secure execute-only code library — code in this region can be called but not read
- SPIM interface: additional external SPI Flash program/data memory interface up to 16 MB
- Up to 96 + 128 KB SRAM
- XMC with 2 chip selects, supporting NOR/PSRAM and NAND memory with multiplexed signals
- Parallel LCD interface, compatible with 8080/6800 modes
- 2.6 to 3.6 V supply and I/O pins
- POR/PDR, PVD
- 4 to 25 MHz crystal oscillator
- Built-in factory-trimmed 48 MHz RC oscillator (1% accuracy at 25°C, 2.5% accuracy over -40°C to +105°C) with ACC
- Built-in calibrated 40 kHz RC oscillator
- 32 kHz crystal oscillator with calibration
- Sleep, stop and standby modes
- VBAT supply for RTC and 42 × 16-bit backup registers
- 3 × 12-bit ADCs, 0.5 μs conversion time (up to 16 input channels)
- Conversion range: 0 to 3.6 V
- Triple sample-and-hold
- Temperature sensor
- 2 × 12-bit DACs
- 14-channel DMA controller
- Supported peripherals: timers, ADC, DAC, SDIO, I2S, SPI, I2C and USART
- SWD and JTAG interfaces
- Cortex-M4F embedded trace module (ETM)
- 37/51/80 multifunctional bidirectional I/O pins; all I/Os mappable to 16 external interrupts; almost all I/Os 5V-tolerant
- All I/Os are fast I/Os with register access up to fAHB
- Up to 8 × 16-bit timers + 2 × 32-bit timers, each with up to 4 channels for input capture/output compare/PWM or pulse counting, and incremental encoder input
- Up to 2 × 16-bit advanced PWM timers with dead-time control and emergency brake for motor control
- 2 watchdog timers (independent and windowed)
- SysTick timer: 24-bit down counter
- 2 × 16-bit basic timers for DAC driving
- Up to 3 × I2C interfaces (SMBus/PMBus support)
- Up to 8 × USART interfaces (ISO7816, LIN, IrDA and modem control support)
- Up to 4 × SPI interfaces (50 Mbit/s), all 4 multiplexable as I2S; I2S2/I2S3 support full-duplex
- Up to 2 × CAN interfaces (2.0B Active)
- USB 2.0 full-speed device interface, crystal-less support
- Up to 2 × SDIO interfaces
Datasheet
Compliance & Export Codes
| Type | Details |
|---|---|
| CNHTS | 8542319090 |
Sourcing Information
Looking for a reliable source for AT32F403ACGT7 from ARTERY? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.
When you need AT32F403ACGT7, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Ready to source AT32F403ACGT7? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.