Advanced Monolithic Systems

AMS1117-3.3

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

MPN
AMS1117-3.3
Package / Case
SOT-223
Key Attributes
1A Low Dropout (LDO) Regulator

Technical Specifications

TypeDescription
Output TypeFixed
Output Voltage3.3 V
Output Current1 A
Supply Voltage15 V
Channels1
TypeDescription
Quiescent Current5 mA
Output ConfigurationPositive
Operating Temperature-40°C~+125°C
FeaturesShort Circuit Protection;Thermal shutdown;Over Current Protection
Package / CaseSOT-223

Product Introduction

The AMS1117 series of adjustable and fixed voltage regulators are designed to provide up to 1A output current and to operate down to 1V input-to-output differential. The dropout voltage of the device is guaranteed maximum 1.3V, decreasing at lower load currents.

On-chip trimming adjusts the reference voltage to 1.5%. Current limit is set to minimize the stress under overload conditions on both the regulator and power source circuitry.

The AMS1117 devices are pin compatible with other three-terminal SCSI regulators and are offered in the low profile surface mount SOT-223 package, in the 8L SOIC package and in the TO-252 (DPAK) plastic package.

Features

  • Three Terminal Adjustable or Fixed Voltages: 1.5V, 1.8V, 2.5V, 2.85V, 3.3V and 5.0V
  • Output Current of 1A
  • Operates Down to 1V Dropout
  • Line Regulation: 0.2% Max.
  • Load Regulation: 0.4% Max.
  • SOT-223, TO-252 and SO-8 package available

Applications

  • High Efficiency Linear Regulators
  • Post Regulators for Switching Supplies
  • 5V to 3.3V Linear Regulator
  • Battery Chargers
  • Active SCSI Terminators
  • Power Management for Notebook
  • Battery Powered Instrumentation

Datasheet

📄 Open Download

Alternative Parts

Common AMS1117-3.3 alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS
ECCNEAR99
CNHTS8542399000
USHTS8542390001
TARIC8542399000
TypeDetails
CAHTS8542390000
BRHTS85423999
INHTS85423900
MXHTS8542.39.99

Frequently Asked Questions

What is the input voltage rating of the AMS1117-3.3 regulator?

The AMS1117-3.3 is rated for an operating voltage up to 15V DC, with a recommended working range of roughly 4.75V to 12V depending on thermal conditions and load current. As a linear regulator, internal power dissipation follows P = (VIN − 3.3V) × IOUT. At a continuous 800mA load from a 12V input, dissipation exceeds 7W, which can quickly trigger thermal shutdown without substantial PCB copper heatsinking. In practice a regulated 5V (±5%) input rail is preferred to minimise thermal stress, improve efficiency, and maintain long-term junction reliability.

Is the AMS1117-3.3 stable when using ceramic MLCC capacitors on the output?

The AMS1117-3.3 feedback loop was originally designed for output capacitors with an effective ESR of roughly 0.3Ω to 3Ω. Modern X5R and X7R ceramic MLCCs often show ESR below 0.01Ω, which can reduce loop damping and may introduce high-frequency oscillation under certain load and layout conditions. Many designs remain stable using 10µF to 22µF MLCCs with good PCB layout and trace impedance. In sensitive applications, some engineers add a small series resistance (about 0.3Ω to 1Ω) or use tantalum/electrolytic capacitors to improve stability margin.

Where is the thermal tab connected on the AMS1117-3.3 and how should it be routed?

In the SOT-223 package the exposed thermal tab is internally connected to Pin 2, the 3.3V output (VOUT), not to Ground. The standard pin configuration is Pin 1 = GND, Pin 2 = VOUT, Pin 3 = VIN. PCB designers must connect the thermal copper area only to the 3.3V output net; routing the tab to a ground plane creates a direct short across the regulator output. For load currents above about 500mA, a copper heatsink region of roughly 500mm² to 1000mm² is commonly recommended to lower junction temperature rise.

Sourcing Information

Need AMS1117-3.3 from Advanced Monolithic Systems for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.

When you need AMS1117-3.3, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.

Need AMS1117-3.3? Send us your required quantity and specifications for a sourcing check and quotation.