ADS1013IDGSR
Analog to Digital Converters (ADC)
Technical Specifications
| Type | Description |
|---|---|
| Maximum Clock Speed | 1 MHz |
| Supply V | 3.75 V |
| Quiescent Current (Iq) | 2uA |
| Integral non - linearity | 0.5LSB |
| Voltage Reference | Built-in |
| Clock/Oscillator | Built-in |
| Resolution(Bits) | 3.3kHz;12 |
| S/N Ratio | - |
| Type | Description |
|---|---|
| ADC architecture | Sigma-Delta |
| Programmable Gain | Not supported |
| Operating Temp | -40°C ~ +125°C |
| Interface | I2C |
| Working Voltage V | 3.75 V |
| Channels | 1.0 |
| Features | Power-on reset;Soft reset |
| Package / Case | MSOP-10 |
Product Introduction
The ADS1013, ADS1014, and ADS1015 devices (ADS101x) are precision, low-power, 12-bit, I2C-compatible, analog-to-digital converters (ADCs) offered in an ultra-small, leadless, X2QFN-10 package, and a VSSOP-10 package. The ADS101x devices incorporate a low-drift voltage reference and an oscillator. The ADS1014 and ADS1015 also incorporate a programmable gain amplifier (PGA) and a digital comparator. These features, along with a wide operating supply range, make the ADS101x well suited for power- and space-constrained, sensor measurement applications.
The ADS101x perform conversions at data rates up to 3300 samples per second (SPS). The PGA offers input ranges from ±256 mV to ±6.144 V, allowing precise large- and small-signal measurements. The ADS1015 features an input multiplexer (MUX) that allows two differential or four single-ended input measurements. Use the digital comparator in the ADS1014 and ADS1015 for under- and overvoltage detection.
The ADS101x operate in either continuous-conversion mode or single-shot mode. The devices are automatically powered down after one conversion in single-shot mode; therefore, power consumption is significantly reduced during idle periods.
Features
- Ultra-Small X2QFN Package: 2 mm × 1.5 mm × 0.4 mm
- 12-Bit Noise-Free Resolution
- Wide Supply Range: 2.0 V to 5.5 V
- Low Current Consumption: 150 μA (Continuous-Conversion Mode)
- Programmable Data Rate: 128 SPS to 3.3 kSPS
- Single-Cycle Settling
- Internal Low-Drift Voltage Reference
- Internal Oscillator
- I²C Interface: Four Pin-Selectable Addresses
- Four Single-Ended or Two Differential Inputs (ADS1015)
- Programmable Comparator (ADS1014 and ADS1015)
- Operating Temperature Range: -40°C to +125°C
Applications
- - Portable Instrumentation - Battery Voltage and Current Monitoring - Temperature Measurement Systems - Consumer Electronics - Factory Automation and Process Control
Datasheet
Alternative Parts
Common ADS1013IDGSR alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Need ADS1013IDGSR from Texas Instruments for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.
When you need ADS1013IDGSR, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Need ADS1013IDGSR? Send us your required quantity and specifications for a sourcing check and quotation.