ADA4932-1YCPZ-RL
Instrumentation, Op Amps, Buffer Amps
Technical Specifications
| Type | Description |
|---|---|
| Common Mode Rejection Ratio | 100 dB |
| Voffset V | 500 V |
| Quiescent Current | 9.6 mA |
| Output Current | 80 mA |
| Settling Time | 9ns |
| Output Type | Differential |
| Input Offset Current(Ios) | 0.025uA |
| Ib - Input Bias Current | 3.7uA |
| Power Supply Rejection Ratio (PSRR) | 96dB |
| Maximum Power Supply Range (Vdd-Vss) | 11V |
| Type | Description |
|---|---|
| Noise density(eN) | 3.6nV/sqrtHz@1MHz |
| Channels | 1 |
| Slew Rate Vus | 2800 V/µs |
| Operating Temperature | -40°C~+105°C |
| Voffset Drift Uv | 9.5 µV |
| Gain Bandwidth Product | - |
| Features | Single-ended to differential conversion;Integrated ADC driver;Adjustable output common-mode voltage;Enable/shutdown function |
| Dual Supply | -5V~5V |
| Single Supply | 3V~11V |
| Package / Case | LFCSP-16(3x3) |
Product Introduction
The ADA4932 series is the next generation of the AD8132, offering higher performance, lower noise, and reduced power consumption. It is ideally suited for use as a single-ended-to-differential or differential-to-differential amplifier driving high-performance ADCs. Users can adjust the output common-mode voltage via the internal common-mode feedback loop to match the ADA4932-x outputs to the ADC inputs. The internal feedback loop also provides excellent output balance and suppresses even-order harmonic distortion products.
For the ADA4932 series, differential gain configurations are easily implemented using a simple external feedback network consisting of four resistors, which determines the closed-loop gain of the amplifier.
The ADA4932 series is fabricated using a silicon-germanium (SiGe) complementary bipolar process, enabling low distortion, low noise, and low power consumption. Low offset and excellent dynamic performance make the ADA4932-x particularly well suited for a wide range of data acquisition and signal processing applications.
The ADA4932-1 is available in a 16-lead LFCSP, and the ADA4932-2 in a 24-lead LFCSP. The pinout is optimized to facilitate PCB layout and minimize distortion. The ADA4932 series is rated for operation over the -40°C to +105°C temperature range; both versions operate from +3 V to ±5 V supplies.
Features
- High performance, low power
- High-speed −3 dB bandwidth: 560 MHz (G = 7)
- 0.1 dB gain flatness to 300 MHz
- Slew rate: 2800 V/μs (25% to 75%)
- 0.7% fast settling time: 9 ns
- Low power: 5.6 mA per amplifier
- Low harmonic distortion SFDR: 100 dB (10 MHz)
- SFDR: 90 dB (20 MHz)
- Low input voltage noise: 3.6 nV/√Hz
- Input offset voltage: ±0.5 mV (typical)
- Externally adjustable gain
- Fractional differential gain supported
- Differential-to-differential or single-ended-to-differential operation
- Adjustable output common-mode voltage
- Input common-mode range shifted down by 1 ±VBE
- Wide supply voltage range: +3 V to ±5 V
- Available in 16-lead and 24-lead LFCSP packages
Applications
- ADC drivers
- Single-ended to differential converters
- IF and baseband gain blocks
- Differential buffers
- Line drivers
Datasheet
Alternative Parts
Common ADA4932-1YCPZ-RL alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| Type | Details |
|---|---|
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |
Sourcing Information
Sourcing ADA4932-1YCPZ-RL from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for ADA4932-1YCPZ-RL, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Looking to source ADA4932-1YCPZ-RL? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.