AD8602ARZ-REEL
Instrumentation, Op Amps, Buffer Amps
Technical Specifications
| Type | Description |
|---|---|
| Common Mode Rejection Ratio | 83 dB |
| Gain Bandwidth Product | 8.2 MHz |
| Voffset V | 80 V |
| Quiescent Current | 680 µA |
| Output Current | 30 mA |
| Rail To Rail | Rail-to-Rail Input, Rail-to-Rail Output |
| Input Offset Current(Ios) | 0.1pA |
| Ib - Input Bias Current | 0.2pA |
| Type | Description |
|---|---|
| Channels | 2 |
| Slew Rate Vus | 5.2 V/µs |
| Operating Temperature | -40°C~+125°C |
| Voffset Drift Uv | 2 µV |
| Features | Reverse-phase input protection;Overvoltage protection;Built-in compensation |
| Noise Nv | 33nV/sqrtHz@1kHz |
| Single Supply | 2.7V~5.5V |
| Package / Case | SOIC-8 |
Product Introduction
The AD8601, AD8602, and AD8604 are single, dual, and quad rail-to-rail, input and output, single-supply amplifiers featuring very low offset voltage and wide signal bandwidth. These amplifiers use a new, patented trimming technique that achieves superior performance without laser trimming. All are fully specified to operate on a 3V to 5 V single supply.
The combination of low offsets, very low input bias currents, and high speed make these amplifiers useful in a wide variety of applications. Filters, integrators, diode amplifiers, shunt current sensors, and high impedance sensors all benefit from the combination of performance features. Audio and other ac applications benefit from the wide bandwidth and low distortion. For the most cost-sensitive applications, the D grades offer this ac performance with lower dc precision at a lower price point.
Applications for these amplifiers include audio amplification for portable devices, portable phone headsets, bar code scanners, portable instruments, cellular PA controls, and multipole filters.
The ability to swing rail-to-rail at both the input and output enables designers to buffer CMOS ADCs, DACs, ASICs, and other wide output swing devices in single-supply systems.
Features
- Low offset voltage: 500 μV maximum
- Single-supply operation: 2.7 V to 5.5 V
- Low supply current: 750 μA/Amplifier
- Wide bandwidth: 8 MHz
- Slew rate: ΔV/ΔμS
- Low distortion
- No phase reversal
- Low input currents
- Unity-gain stable
- Qualified for automotive applications
Applications
- Current sensing
- Barcode scanners
- PA controls
- Battery-powered instrumentation
- Multipole filters
- Sensors
- ASIC input or output amplifiers
- Audio
Datasheet
Alternative Parts
Common AD8602ARZ-REEL alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| Type | Details |
|---|---|
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |
Sourcing Information
Sourcing AD8602ARZ-REEL from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
For AD8602ARZ-REEL, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Looking to source AD8602ARZ-REEL? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.