AD822ARMZ-REEL
Instrumentation, Op Amps, Buffer Amps
Technical Specifications
| Type | Description |
|---|---|
| Iq A | 0.002 A |
| Input Offset Current(Ios) | 20pA |
| Ib - Input Bias Current | 25pA |
| Output Current | 0.015 A |
| Channels | 2.0 |
| Voffset V | 800 V |
| Slew Rate Vus | 3.0 |
| Operating Temp | -40°C ~ +85°C |
| Common Mode Rejection Ratio | 80.0 |
| Type | Description |
|---|---|
| Voffset Drift Uv | 2.0 |
| Gain Bandwidth Product | 1.8 MHz |
| Features | High capacitive load driving |
| Noise Nv | 13.0 |
| Dual Supply | -15V~-2.5V;2.5V~15V |
| Rail To Rail | Rail-to-rail output |
| Single Supply | 5V~30V |
| Package / Case | MSOP-8 |
Product Introduction
The AD822 is a dual precision, low power FET input op amp that can operate from a single supply of 5V to 30V or from dual supplies of ±2.5V to ±15V. It has true single- supply capability with an input voltage range extending below the negative rail, allowing the AD822 to accommodate input signals below ground while in the single- supply mode. Output voltage swing extends to within 10mV of each rail, providing the maximum output dynamic range.
Offset voltage of 800μV maximum, offset voltage drift of 2μV/°C, input bias currents below 25pA, and low input voltage noise provide dc precision with source impedances up to a gigaohm. The 1.8MHz unity- gain bandwidth, - 93dB total harmonic distortion (THD) at 10kHz, and 3V/μs slew rate are provided with a low supply current of 800μA per amplifier.
Features
- True single- supply operation
- Output swings rail- to- rail
- Input voltage range extends below ground
- Single- supply capability from 5 V to 30V
- Dual- supply capability from ±2.5V to ±15V
- High load drive
- Capacitive load drive of 350 pF, G = +1
- Minimum output current of 15 mA
- Excellent ac performance for low power
- 800μA maximum quiescent current per amplifier
- Unity- gain bandwidth:1.8 MHz
- Slew rate of 3V/μs
- Good dc performance
- 800μV maximum input offset voltage
- 2μV/°C typical offset voltage drift
- 25 pA maximum input bias current
- Low noise
- 13nV/√Hz at 10kHz
- No phase inversion
Applications
- - Battery- powered precision instrumentation - Photodiode preamps - Active filters - 12- bit to 14- bit data acquisition systems - Medical instrumentation - Low power references and regulators
Datasheet
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| Type | Details |
|---|---|
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |
Sourcing Information
Sourcing AD822ARMZ-REEL from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for AD822ARMZ-REEL, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Need AD822ARMZ-REEL? Send us your required quantity and specifications for a sourcing check and quotation.