Analog Devices

AD8009JRTZ-REEL7

Amplifiers & Comparators

Manufacturer
MPN
AD8009JRTZ-REEL7
Package / Case
SOT-23-5
Key Attributes
Ultra-high-speed low-distortion amplifier

Technical Specifications

TypeDescription
Common Mode Rejection Ratio52 dB
Gain Bandwidth Product630 MHz
Voffset V0.005 V
Quiescent Current10 mA
Output Current175 mA
Rail To Rail-
Input Offset Current(Ios)-
Ib - Input Bias Current150uA
Channels1
TypeDescription
Slew Rate Vus5.5 V/µs
Operating Temperature-40°C~+85°C
Voffset Drift Uv150 µV
FeaturesESD protection
Noise Nv1.9nV/sqrtHz@10MHz
Dual Supply-6V~6V
Single Supply5V~16V
Package / CaseSOT-23-5

Product Introduction

AD8009 is an ultrahigh speed current feedback amplifier featuring a slew rate of 5500 V/μs and a rise time of only 545 ps, making it ideal for use as a pulse amplifier.

The high slew rate minimizes slew-induced distortion, enabling a large signal bandwidth of 440 MHz to meet the demands of high resolution video graphics systems. Signal quality remains high across the full wideband range, with worst-case distortion of -40 dBc (250 MHz, G = +10, 1 V p-p). For applications with multitone signals such as IF signal chains, the third-order intercept point (3IP) at the same frequency is 12 dBm. This distortion performance, combined with the current feedback architecture, allows the AD8009 to be flexibly deployed as a gain stage amplifier in IF/RF signal chains.

The AD8009 can deliver more than 175 mA of load current, driving four back-terminated video loads while maintaining low differential gain and phase errors (0.02% and 0.04°, respectively). The high drive capability is further demonstrated by its ability to deliver 10 dBm of output power at 70 MHz with a spurious-free dynamic range (SFDR) of –38 dBc.

The AD8009 is available in a compact SOIC package, rated for the industrial temperature range of -40°C to +85°C. The device is also offered in a SOT-23-5 package, rated for the commercial temperature range of 0°C to 70°C.

Features

  • Ultra-high slew rate: 5500 V/μs (4 V step, G = +2)
  • Rise time: 545 ps (2 V step, G = +2)
  • Large-signal bandwidth 440 MHz, G = +2; 320 MHz, G = +10
  • Small-signal bandwidth (–3 dB) 1 GHz, G = +1; 700 MHz, G = +2
  • 0.7% settling time: 10 ns (2 V step, G = +2)
  • Low distortion over wide bandwidth
  • SFDR –66 dBc (20 MHz, 2nd harmonic); –75 dBc (20 MHz, 3rd harmonic)
  • Third-order intercept (3IP) 26 dBm (70 MHz, G = +10)
  • Excellent video specifications
  • 0.1 dB gain flatness to 75 MHz
  • 0.01% differential gain error, RL = 150 Ω
  • 0.01° differential phase error, RL = 150 Ω
  • High output drive
  • 175 mA output load drive current
  • 10 dBm with SFDR of –38 dBc (70 MHz, G = +10)
  • Power supply
  • Supply voltage: ±5 V to ±5 V
  • Supply current: 74 mA (typical)

Applications

  • Pulse amplifier
  • IF/RF gain stage/amplifier
  • High-resolution video graphics
  • High-speed instrumentation
  • CCD imaging amplifier
  • RF filter driver
  • RGB monitor driver
  • Capacitive load driver

Datasheet

📄 Open Download

Alternative Parts

Common AD8009JRTZ-REEL7 alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCNEAR99
CNHTS8542339000
USHTS8542330001
TARIC8542339000
TypeDetails
CAHTS8542330000
BRHTS85423390
INHTS85423300
MXHTS8542.33.99

Sourcing Information

Looking for a reliable source for AD8009JRTZ-REEL7 from Analog Devices? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.

When you need AD8009JRTZ-REEL7, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.

Need AD8009JRTZ-REEL7? Send us your required quantity and specifications for a sourcing check and quotation.