AD7794CRUZ
Data Converters (ADC/DAC)
Technical Specifications
| Type | Description |
|---|---|
| Maximum Clock Speed | 64 kHz |
| Quiescent Current (Iq) | 1uA |
| Integral Non - Linearity | - |
| Voltage Reference | Built-in |
| Clock/Oscillator | Built-in |
| Resolution(Bits) | 470Hz;24 |
| S/N Ratio | - |
| DNL (LSB) | - |
| Type | Description |
|---|---|
| ADC Architecture | Sigma-Delta |
| Programmable Gain | Support |
| Operating Temperature | -40°C~+125°C |
| Interface | SPI |
| Supply Voltage | 2.7V~5.25V |
| Channels | 6 |
| Features | Bipolar input;Multi-chip synchronization;Built-in temperature sensor |
| Package / Case | TSSOP-24 |
Product Introduction
The AD7794/AD7795 are low power, low noise, complete analog front ends for high precision measurement applications. They contain a low noise, 24-/16-bit ∑-Δ ADC with six differential inputs. The on-chip low noise instrumentation amplifier means that signals of small amplitude can be interfaced directly to the ADC.
Each device contains a precision, low noise, low drift internal band gap reference, and can also accept up to two external differential references. Other on-chip features include programmable excitation current sources, burnout currents, and a bias voltage generator that is used to set the commonmode voltage of a channel to AVDD / 2. The low-side power switch can be used to power down bridge sensors between conversions, minimizing the system’s power consumption. The AD7794/AD7795 can operate with either an internal clock or an external clock. The output data rate from each part can vary from 4.17 Hz to 470 Hz.
Both parts operate with a power supply from 2.7 V to 5.25 V. The B-grade parts (AD7794 and AD7795) are specified for a temperature range of -40 ℃ to +105 ℃ while the C-grade part (AD7794) is specified for a temperature range of -40 ℃ to +125 ℃. They consume a current of 400 μA typical and are housed in a 24-lead TSSOP.
Features
- Up to 23 effective bits
- RMS noise: 40 nV @ 4.17 Hz, 85 nV @ 16.7 Hz
- Current: 400 μA typical
- Power-down: 1 μA maximum
- Low noise, programmable gain, instrumentation amp
- Band gap reference with 4 ppm/°C drift typical
- Update rate: 4.17 Hz to 470 Hz
- Six differential analog inputs
- Internal clock oscillator
- Simultaneous 50 Hz/60 Hz rejection
- Reference detect
- Programmable current sources
- On-chip bias voltage generator
- Burnout currents
- Low-side power switch
- Power supply: 2.7 V to 5.25 V
- Temperature range: B grade: -40°C to +105°C C grade: -40°C to +125°C
- Independent interface power supply
- 24-lead TSSOP
- 3-wire serial interface, QSPI, MICROWIRE, and DSP compatible Schmitt trigger on SCLK
Applications
- Temperature measurement
- Pressure measurement
- Weigh scales
- Strain gage transducers
- Gas analysis
- Industrial process control
- Instrumentation
- Blood analysis
- Smart transmitters
- Liquid/gas chromatography
- 6-digit DVM
Datasheet
Alternative Parts
Common AD7794CRUZ alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Looking for a reliable source for AD7794CRUZ from Analog Devices? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for AD7794CRUZ, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Ready to source AD7794CRUZ? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.