AD7792BRUZ-REEL
Analog to Digital Converters (ADC)
Technical Specifications
| Type | Description |
|---|---|
| Maximum Clock Speed | 64 kHz |
| Quiescent Current (Iq) | 1uA |
| Integral non - linearity | - |
| Voltage Reference | Built-in |
| Clock/Oscillator | Built-in |
| Resolution(Bits) | 470Hz;16 |
| S/N Ratio | - |
| DNL (LSB) | - |
| Type | Description |
|---|---|
| ADC architecture | Sigma-Delta |
| Programmable Gain | Support |
| Operating Temp | -40°C ~ +105°C |
| Interface | SPI |
| Working Voltage V | 3.975 V |
| Channels | 3.0 |
| Features | Bipolar input;Multi-chip synchronization;Built-in temperature sensor;Bipolar power supply;Auto calibration;Input buffer;Soft reset;Power-on reset |
| Package / Case | TSSOP-16 |
Product Introduction
The AD7792/AD7793 are low power, low noise, complete analog front ends for high precision measurement applications. They incorporate a low noise, 16-bit/24-bit Σ-Δ ADC with three differential analog inputs. An on-chip low noise instrumentation amplifier enables direct interfacing to small signal inputs. At a gain of 64 and an update rate of 4.17 Hz, the RMS noise is 40 nV. Both devices include an on-chip precision, low noise, low drift internal bandgap reference, and an external differential reference can also be used. Additional on-chip features include programmable excitation current sources, burnout current sources, and a bias voltage generator. The bias voltage generator is used to set the common-mode voltage of the channel to AVDD/2. The devices can operate with an internal or external clock, and the output data rate is software programmable over a range of 4.17 Hz to 470 Hz. The devices operate from a 2.7 V to 5.25 V supply, with a typical current consumption of 400 μA, and are available in a 16-lead TSSOP package.
Features
- Up to 23-bit effective resolution
- RMS noise: 40 nV (at 4.17 Hz); 85 nV (at 16.7 Hz)
- Current: 400 μA (typical)
- Power-down mode: 1 μA (maximum)
- Low-noise programmable gain instrumentation amplifier
- Bandgap voltage reference with typical temperature coefficient of 4 ppm/°C
- Update rate: 4.17 Hz to 470 Hz
- 3 differential inputs
- Internal clock oscillator
- Simultaneous 50 Hz/60 Hz rejection
- Programmable current source
- On-chip bias voltage generator
- Burnout current
- Supply voltage: 2.7 V to 5.25 V
- Temperature range: -40 °C to +105 °C
- Independent interface supply
- 16-lead TSSOP package
- Interface: 3-wire serial interface, SPI, QSPI, MICROWIRE, and DSP compatible, Schmitt trigger on SCLK pin
Applications
- - Thermocouple measurement - RTD measurement - Thermistor measurement - Gas analysis - Industrial process control - Instrumentation - Portable instrumentation - Blood analysis - Smart transmitters - Liquid/gas chromatography - 6-digit DVM
Datasheet
Alternative Parts
Common AD7792BRUZ-REEL alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Looking for a reliable source for AD7792BRUZ-REEL from Analog Devices? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for AD7792BRUZ-REEL, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Ready to source AD7792BRUZ-REEL? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.