AD7671AST
Data Converters (ADC/DAC)
Technical Specifications
| Type | Description |
|---|---|
| Quiescent Current (Iq) | - |
| Integral Non - Linearity | 2.5LSB |
| Voltage Reference | External |
| Clock/Oscillator | Built-in |
| Resolution(Bits) | 16;1MHz;800kHz |
| S/N Ratio | 90dB |
| ADC Architecture | SAR |
| Programmable Gain | Not supported |
| Type | Description |
|---|---|
| Operating Temperature | -40°C~+85°C |
| Interface | Parallel port;Serial port |
| Supply Voltage | 5 V |
| Channels | 1 |
| Maximum Clock Speed | - |
| Features | Bipolar input |
| Package / Case | LQFP-48(7x7) |
Product Introduction
The AD7671 is a 16-bit, 1 MSPS, charge redistribution SAR, analog-to-digital converter that operates from a single 5 V power supply. It contains a high speed 16-bit sampling ADC, a resistor input scaler that allows various input ranges, an internal conversion clock, error correction circuits, and both serial and parallel system interface ports.
The AD7671 is hardware factory-calibrated and is comprehensively tested to ensure such ac parameters as signal-to-noise ratio (SNR) and total harmonic distortion (THD), in addition to the more traditional dc parameters of gain, offset, and linearity.
It features a very high sampling rate mode (Warp), a fast mode (Normal) for asynchronous conversion rate applications, and, for low power applications, a reduced power mode (Impulse) where the power is scaled with the throughput.
It is fabricated using high performance, 0.6 micron CMOS process and is available in a 48-lead LQFP and a tiny 48-lead LFCSP, with operation specified from -40°C to +85°C.
Features
- Throughput 1 MSPS (Warp Mode) 800 kSPS (Normal Mode)
- INL: ±2.5 LSB Max (±0.0038% of Full Scale)
- 16-Bit Resolution with No Missing Codes
- S/(N+D): 90 dB Typ @ 250 kHz
- THD: –100 dB Typ @ 250 kHz
- Analog Input Voltage Ranges Bipolar: ±10 V, ±5 V, ±2.5 V Unipolar: 0 V to 10 V, 0 V to 5 V, 0 V to 2.5 V
- Both AC and DC Specifications
- No Pipeline Delay
- Parallel (8/16 Bits) and Serial 5 V/3 V Interface
- SPI/QSPI/MICROWIRE/DSP Compatible
- Single 5 V Supply Operation
- Power Dissipation 112 mW Typical 15 μW @ 100 SPS
- Power-Down Mode: 7 μW Max
- Package: 48-Lead Quad Flatpack (LQFP)
- Package: 48-Lead Chip Scale (LFCSP)
- Pin-to-Pin Compatible Upgrade of the AD7665/AD7664
Applications
- Data Acquisition
- Communication
- Instrumentation
- Spectrum Analysis
- Medical Instruments
- Process Control
Datasheet
Alternative Parts
Common AD7671AST alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Need AD7671AST from Analog Devices for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.
When you need AD7671AST, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Ready to source AD7671AST? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.