A5976GLPTR-T
Motor Driver ICs
Technical Specifications
| Type | Description |
|---|---|
| Interface | STEP/DIR |
| Drive Type | Bipolar Driver |
| Number of H-Bridges | 2 |
| Technology | Yes |
| Step Resolution | 1;2;4;16 |
| Control Voltage | 3V~5.5V |
| Type | Description |
|---|---|
| Motor Drive Voltage(Vm) | - |
| Features | Motor step-out prevention function;Power-on reset;Overvoltage protection;Built-in charge pump;Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Under-voltage lockout;Dead-time / shoot-through protection |
| Operating Temperature | -40°C~+105°C |
| Output Current | 2.8 A |
| Rds On Ohm | 220mΩ |
| Package / Case | TSSOP-28-EP |
Product Introduction
The A5976 is a complete microstepping motor driver with built-in translator. It is designed to operate bipolar stepper motors in full-, half-, quarter-, and sixteenth-step modes, with output drive capability of 40 V and ±2.8 A. The A5976 includes a fixed off-time current regulator that has the ability to operate in slow-, fast-, or mixed-decay modes. This current-decay control scheme results in reduced audible motor noise, increased step accuracy, and reduced power dissipation.
The translator is the key to the easy implementation of the A5976. Simply inputting one pulse on the STEP input drives the motor one step (two logic inputs determine if it is a full-, half-, quarter-, or sixteenth-step). There are no phase sequence tables, high-frequency control lines, or complex interfaces to program. The A5976 interface is an ideal fit for applications where a complex microprocessor is unavailable or overburdened.
Internal synchronous rectification control circuitry is provided to improve power dissipation during PWM operation. Internal circuit protection includes thermal shutdown with hysteresis, undervoltage lockout (UVLO), and crossover-current protection. Special power-up sequencing is not required.
The A5976 is supplied in a thin (< 1.2 mm) 28-pin TSSOP with an exposed thermal pad (suffix LP). The package is lead (Pb) free (suffix -T), with 100% matte-tin leadframe plating.
Features
- ±2.8 A, 40 V output rating
- Low RDS(on) outputs, 0.22 Ω source, 0.15 Ω sink typical
- Automatic current decay mode detection/selection
- 3 to 5.5 V logic supply voltage range
- Mixed, fast, and slow current decay modes
- Fault output
- Mixed decay for both rising/falling step option
- Synchronous rectification for low power dissipation
- Internal UVLO and thermal shutdown circuitry
- Crossover-current protection
- Short-to-ground protection
- Short-to-VBB protection
- Shorted load protection
Datasheet
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| Type | Details |
|---|---|
| ECCN | EAR99 |
Sourcing Information
Need A5976GLPTR-T from ALLEGRO for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for A5976GLPTR-T, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Ready to source A5976GLPTR-T? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.