A4987SESTR-T
Motor Driver ICs
Technology: Yes
Features: Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Under-voltage lockout;Built-in charge pump;Dead-time / shoot-through protection
Operating Temperature: -20℃~+85℃
Interface: Parallel
Motor Drive Voltage(Vm): 8V~35V
Output Current: 1A
Number of H-bridges: 2
Drive Type: Bipolar Driver
Step Resolution: 4
RDS(on): 700mΩ
Technical Specifications
| Type | Description |
|---|---|
| Interface | Parallel |
| Drive Type | Bipolar Driver |
| Number of H-Bridges | 2 |
| Technology | Yes |
| Step Resolution | 4 |
| Control Voltage | 3V~5.5V |
| Type | Description |
|---|---|
| Motor Drive Voltage(Vm) | 8V~35V |
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Under-voltage lockout;Built-in charge pump;Dead-time / shoot-through protection |
| Operating Temperature | -20°C~+85°C |
| Output Current | 1 A |
| Rds On Ohm | 700mΩ |
| Package / Case | QFN-24-EP(4x4) |
Product Introduction
The A4987 is a dual DMOS full-bridge stepper motor driver with parallel input communication and overcurrent protection. Each full-bridge output is rated up to 35 V and ±1 A. The A4987 includes fixed off-time pulse width modulation (PWM) current regulators, along with 2-bit nonlinear DACs (digital-to-analog converters) that allow stepper motors to be controlled in full, half, and quarter steps. The PWM current regulator uses the patented mixed decay mode for reduced audible motor noise, increased step accuracy, and reduced power dissipation.
Internal synchronous rectification control circuitry is provided to improve power dissipation during PWM operation.
The outputs are protected from shorted load and short-to-ground events, which protect the driver and associated circuitry from thermal damage or flare-ups. Other protection features include thermal shutdown with hysteresis, undervoltage lockout (UVLO) and crossover current protection. Special power-up sequencing is not required.
The A4987 is supplied in two packages, a 24-contact QFN (ES) and a 24-pin TSSOP (LP). Both packages have exposed thermal pads for enhanced thermal performance. The 24-contact ES is 4 mm×4 mm, with a nominal overall package height of 0.75 mm. The 24-pin LP is a TSSOP with 0.65 pitch and an overall package height of ≤1.2 mm. Both packages are lead (Pb) free, with 100% matte tin leadframe plating.
Features
- Low RDS(ON) outputs
- Internal mixed current decay mode
- Synchronous rectification for low power dissipation
- Internal UVLO
- Crossover-current protection
- 3.3 and 5 V compatible logic supply
- Thin profile QFN and TSSOP packages
- Thermal shutdown circuitry
- Short-to-ground protection
- Shorted load protection
- Low current Sleep mode, <10 μA
Datasheet
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| Type | Details |
|---|---|
| ECCN | EAR99 |
Sourcing Information
Looking for a reliable source for A4987SESTR-T from ALLEGRO? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.
When you need A4987SESTR-T, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Need A4987SESTR-T? Send us your required quantity and specifications for a sourcing check and quotation.